The T2 'Distance' supplementary plate is crucial for understanding upcoming road events. It tells you exactly how many meters or kilometers remain until the situation indicated by the main sign above begins, such as a hazard, junction, or traffic control. This allows you to prepare in advance by adjusting your speed and positioning, making driving safer, especially in poor visibility or at higher speeds. Always treat the distance shown as the remaining way to the situation, not the location of the sign itself.
This supplementary plate, crucial for Swedish driving licence theory, indicates how far you are from the main sign's specified event. Correct road sign interpretation is vital for anticipating junctions, restrictions, or dangers, preparing you thoroughly for your theory test.
This supplementary plate provides a distance measurement connected to the sign above. It tells you how many meters (or other stated units) remain until the situation begins, such as a hazard, a junction, a control, or a restriction. The main sign’s information is therefore about something ahead, not necessarily at the sign location. This helps you plan your speed, positioning, and attention in good time. Always interpret the distance as forward along the road unless clearly stated otherwise.
Shows how far it is to the place or hazard the main sign refers to.
Get clear, practical answers to the most common questions about the T2 - Distance road sign. Learn how the sign works, what rules it represents, and how it affects real driving situations. This FAQ strengthens your understanding and supports accurate decision making for the Swedish driving theory exam in Sweden.
The T2 'Distance' sign is a supplementary plate used with other traffic signs. Its purpose is to indicate the distance remaining to the hazard, junction, control, or restriction that the main sign refers to. It acts as an advance warning, allowing you to prepare effectively before reaching the actual situation.
When you see a T2 sign above another sign, you should note the distance indicated. This tells you that the situation described by the main sign is not immediate but will occur after travelling that specific distance. You should then start planning your speed and road position accordingly, preparing for the upcoming event rather than reacting to it only when you arrive.
A common trap is assuming the hazard or situation is right at the sign. Learners might also delay their preparations until they are very close to the indicated distance. The theory exam tests your ability to understand that the T2 sign provides advance notice, requiring you to start adapting your driving well before reaching the actual hazard or change in road conditions.
Yes, the T2 'Distance' sign is a supplementary plate designed to be used with a wide variety of other traffic signs. It can appear above warning signs (like sharp bends), regulatory signs (like speed limits or restrictions), or information signs (like upcoming junctions or ferry terminals) to clarify the distance to the relevant event.
Not necessarily immediately, but you should start adjusting your speed and observing your surroundings to be ready. The '200m' indicates that the main sign's warning or instruction applies from that point forward. It's an opportunity to reduce speed gradually and prepare for what's coming, rather than waiting until the last moment.
A clear reference image of the T2 - Distance road sign used in Sweden.
The T2 - Distance road sign may also be known by these alternative names or terms.
The T2 - Distance road sign is part of the Supplementary Plates (T) category, which groups together signs with similar rules and functions.
Comparing signs like 'Distance' with others helps build stronger recognition patterns, crucial for accurate theory test revision. Understanding these subtle differences prevents confusion and improves your recall of similar road signs.
The T1 Sign: Defining the Exact Stretch Where a Rule Applies
Be extra vigilant for pedestrians who cannot hear you approaching with the Reduced Hearing sign (T10).
Understand the T11 Extent sign to know where traffic rules apply.
The T12 Direction sign shows you exactly which way an instruction applies.
All Way Yield: Understand Who Has Priority at This Junction
The T14 All Way Stop sign means everyone must stop at this junction.
Understand Junction Priority with the T15 Continuation of Roads Sign
The T16 'Fee' Sign Means Parking Requires Payment and Adherence to Conditions
After reviewing this complete list of Swedish road signs, deepen your understanding by exploring signs by category or practicing with simulated test questions. Solidify your recognition skills and ensure you are fully prepared for every aspect of the official driving theory exam.
All Swedish Road Signs List