Sign 264-2 is a regulatory traffic sign in Germany that imposes a binding restriction: the actual width of any vehicle or combination must not exceed 2 meters. This sign is crucial for managing traffic flow and safety, especially on narrower roads, in restricted areas, or at specific points like junctions or entrances. You must recognize this limit early and adjust your driving, whether it's your speed, lane position, or route choice, before you reach the controlled zone. Always consider supplementary plates, road markings, and traffic lights, as they can modify how this rule applies.
This regulatory sign (264-2) enforces a specific actual width limit of 2 meters, crucial for navigating Germany's traffic rules and ensuring safe passage. Mastering its meaning is vital for your theory test revision and for making informed driving decisions on the road.
German road sign 264-2, officially designated "Actual width limit - 2 m", belongs to the regulatory signs group. It creates a binding restriction or prohibition that applies until it is cancelled, replaced, or limited by a supplementary plate. You may see it in junctions, restricted streets, cycle and pedestrian facilities, parking areas, low-emission zones, and roads with binding lane or speed rules, depending on how the road authority has arranged the location. The practical meaning is not just the symbol itself, but the driving decision it triggers: adjust speed, position, priority, route choice, stopping behaviour, or attention before the situation becomes urgent. For learners, the key skill is knowing whether the sign commands, forbids, limits, or cancels a rule. Always combine the sign with road markings, traffic lights, police instructions, and any supplementary plates at the same location.
German road sign 264-2 means "Actual width liwith - 2 m" and is officially listed as "Actual width limit - 2 m". In practice, it tells drivers to recognise the situation early, adapt before reaching the controlled area, and check whether markings or supplementary plates change how the rule applies.
Get clear, practical answers to the most common questions about the 264-2 - Actual width liwith - 2 m road sign. Learn how the sign works, what rules it represents, and how it affects real driving situations. This FAQ strengthens your understanding and supports accurate decision making for the German driving theory exam in Germany.
Sign 264-2 signifies that the maximum permissible width for a vehicle or combination of vehicles is strictly 2 meters. This restriction is binding until it is cancelled by another sign or rule. You must ensure your vehicle's actual width does not exceed this limit at the point where the sign applies.
When you see sign 264-2, you need to assess if your vehicle, including any load or mirrors, is wider than 2 meters. If it is, you must find an alternative route or a legal place to stop before entering the restricted area. If your vehicle is within the limit, you may proceed, but always be mindful of your vehicle's dimensions and the surroundings.
The sign itself creates a strict 2-meter limit. However, supplementary plates often accompany this sign. These plates can specify exceptions, for example, by limiting the rule to certain times of day, specific vehicle types (like excluding buses or trucks), or by indicating a specific section of road where the limit applies. Always check for such plates.
Sign 264-2 specifies the maximum *actual width* of the vehicle itself, including any cargo or attachments, not just the width of a specific lane. While lane width signs focus on the available space within a lane, sign 264-2 is a comprehensive prohibition on vehicle width to prevent passage, regardless of lane markings.
A common trap is confusing 'actual width' with 'vehicle width' or 'lane width'. Learners might also forget to check for supplementary plates that could modify the rule, or assume the restriction ends at the next junction. Always read the sign and any accompanying plates carefully and apply the rule strictly.
A clear reference image of the 264-2 - Actual width liwith - 2 m road sign used in Germany.
The 264-2 - Actual width liwith - 2 m road sign may also be known by these alternative names or terms.
The 264-2 - Actual width liwith - 2 m road sign is part of the German Regulatory Signs category, which groups together signs with similar rules and functions.
Reviewing similar traffic signs together sharpens your ability to distinguish between them, crucial for accurate recognition during your theory test revision. Understanding the nuances of related road signs aids in safer driving decisions and effective exam preparation.
Master the Standing Railway Crossbuck (Andreaskreuz - stehend) Sign
Understand the Railway Crossbuck with Blitzpfeil (Sign 201-51) in Germany
German road sign 201-52: The Railway Crossbuck 'Andreaskreuz - liegend'
Germany's Railway Crossbuck Sign 201-53 with Blitzpfeil: What You Need to Know
Understand the German "Yield" Sign (Sign 205 - Vorfahrt gewähren)
Sign 206: Stop and Yield – You must stop and give way
Sign 208: You Must Yield to Oncoming Traffic on This Road
Mandatory Direction - Right: Sign 209 Explained
Deepen your understanding of specific road sign categories or test your knowledge with practice questions. Explore our themed sign groups for targeted study or jump into quizzes to reinforce your recognition skills for the official German theory exam.
All German Road Signs List